What issues should we pay attention to when using UV flaw detection lamps?

1. When using UV detection lights, avoid direct exposure to eyes and skin to prevent eye and skin damage.

2. When using UV lamps, indoor air circulation should be ensured and protection should be taken. At the same time, avoid prolonged exposure to ultraviolet rays to avoid harm to your health.

3. UV Flaw detection lights and accessories should be used or stored in a clean, dry, and non-corrosive environment.

4. If there is dirt on the filter, it should be removed in time because it will affect the emission of black light.

5. If the filter has cracks, it should be replaced in time, because cracks will allow visible light and medium and short-wave ultraviolet light to pass.

6. During the use of the UV lamp, if you find that the lamp does not light up or flickers, you should stop using it immediately and check whether the flaw detection lamp has poor contact or whether the lithium battery is insufficiently charged.

Figure below: High-Intensity UV Detection Flashlight XEPU-1530B